Screw in the adjustment wheel. See fig 4.
Insert the handlebar stem into the head tube
and tighten firmly by means of the wheel
lever. The handlebar stem can be set in five
different height positions. See fig 4.
The pedal marked R (Right) to be assembled on the right hand
side of the cycle (the chain wheel side). The pedal axle has a
right hand thread and must be threaded onto the crank
clockwise. Tighten firmly. See fig 5.
The pedal marked L (Left) to be assembled on the left
hand side of the cycle. The pedal axle has a left hand
thread and must be threaded onto the crank
counter clockwise. Tighten firmly. See fig 5.
Note: Check now and then that both pedals are still
firmly tightened. If not the threading will be
damaged.
Fig 4
Fig. 5
R Right
L Left
7
