1
Monark 939 E
14
Scale - zero adjustment
Connect power to the bike. Loosen possible tension in
the brake belt by moving the indicator to 4 kp. Hold
it there until the belt feels loose. Then move the indi-
cator to 0 again. Now check if the indicator is aligned
with the 0-index on the scale. If adjustment is needed,
loosen the locknut(1) and then change the position of
the scale board, so that it will have its 0-index in line
with the indicator/moving pointer. Tighten the lock-
nut after the adjustment. See fig: Scale adjustment.
Fig: Scale adjustment
1) Lock nut
