Note:
4:3 PS and 4:3LB only valid under SD mode (resolution is 480p/576p or
480i/576i).
2.4 Film Mode: system will output 1080p 24Hz if this item is set to ON and disk
movies are recorded on film at rate of 24 frames per second.
Note:
this item only effect when Resolution is set to 1080p, and make sure your
TV can support 1080P24Hz mode.
2. Display
2.1 TV Type: Select to output NTSC or PAL video format .
2.2 Resolution: Set maximum resolution of your TV here to get best video
quantity, if you are not sure, please use HDMI Auto, system will read the
preferred resolution your TV supported via EDID.
2.3 TV Aspect: Select right video ratio based on your TV. ( Refer to below table)
Note:
Aspect setting only effect HDMI and component output, and 4:3
setting has no effect if resolution has been set to 720p or 1080i or1080p).
System Setup
Advanced Features
