5
6
Position the back plate on the wall.
Make sure that none of the labels fall out
when attaching the wall plate. Insert the
screws and tighten them up. Now you
can begin to connect the wires.
7
Below you can fi nd the wiring
diagram for heat and cooling systems.
The heating system diagram shows the
connection between thermostat and
heating system (C and W to T1 and T2).
The cooling system diagram shows the
connection between cooling system,
Dry Contact and thermostat. The
thermostat and Dry Contact connect
through the C2 and Y terminals, while
the Dry Contact connects to the cooling
system through the cables that were
connected to your previous thermostat.
This will vary depending on the cooling
system brand.
Both systems connect to the power
supply through L and N.
Summary of Contents for Smart Thermostat
Page 1: ...Designed for your comfort ...
Page 26: ......
