MoMi WOODI, User Manual

Page: 15 / 24

EN 15
NOTE: The wooden legs have holes for the installation of the footrests, make sure that they are facing
one direction and are at the front before twisting, otherwise the footrests cannot be correctly fitted.
3. Footplate
First, insert the smaller footrest into the upper holes on the wooden legs as shown in the picture be-
low. Insert short screws (11) into the buttonholes and tighten with the hexagon key. Then repeat this
step for the larger footrest, which should be installed below the smaller footrest.
4. Assembling the seat on a turntable
Turn the seat upside down. Then align the screw holes on the top of the swivel pad with the corre-
sponding tabs on the bottom of the seat. Insert the large screws (15) in all holes and tighten with an
Allen key until you feel resistance. Rotate the seat and check that it is tightened securely against the
swivel washer by pulling both parts in the opposite direction.
5. Assembling the seat on a wooden frame
Place the wooden rack in front of you with the footrests at the front. Grasp the seat with the swivel
pad and put it on the frame so that the front and footrests are in line. Holding the whole thing, lay it
gently on its side, while making sure that both elements do not come apart. Insert the large screws (13)
into the remaining holes in the wooden frame and tighten with an Allen key until you feel resistance.