7. Slide the top of the music box through the hole in the seat cover and onto the footrest frame .Re-
verse the procedure above to remove the music box, attached the clips under the seat(8,9).(Notice the
orientation of the music box )
8. Clip the toy bar to each side of the bouncer franne(10). Pull the clip off to remove the toy bar.
12
TAKE CARE OF THE ENVIRONMENT:
When you stop using the Momi EBES product, please dispose of it to a suitable facility in accordance
with local law.
This symbol means that the product and its components, as well as additional parts, such as batteries, cannot be
disposed of with household waste. The correct way of disposal and recycling can be obtained from representatives and
managers of the property and residential areas, as well as local authorities.
GUARANTEE EXCLUSIONS AND LIMITATIONS:
We are responsible for the quality of our products. Our guarantee does not cover defects or damage
due to misuse of the product or mechanical damage.
PRODUCT MAINTENANCE
• It is recommended to systematically clean the fabric as follows: hand washing or washing of delicate
fabrics in a washing machine at a maximum temperature of 30 degrees.
• Cleaning must be done by an adult
• During cleaning and washing, regularly check the fabric for rips
• To avoid accelerated aging of the product or impossible cleaning of the fabrics, avoid leaving the
product in the sun. Deformation and color fading may occur
• Washing of the fabric is allowed using the program for delicate fabrics and maximum 30 degrees
without spinning
• Spinning of textile materials is prohibited and drying at a room temperature is recommended
• The use of strong detergents for cleaning and maintenance is strictly forbidden and using bleach is
completely forbidden
• Ironing of fabrics and all fabric elements is strictly prohibited
• Steel and plastic parts can be wiped with a damp cloth and then wiped dry
Thank you for reading the instruction manual carefully. Please keep it for future reference.
EN
ADJUSTABLE SEAT RESTRAIN
Place baby in the bouncer with the seat restraint positioned between his legs.
Fasten the buckles on both sides of the restraint, pressing until you hear a “click”.
Make sure the seat restraint is secure by pulling it away from your baby’s body. It
should remain fastened. Always use restraint system.
BATTERY INSTALLATION:
Use a small Philips-head screwdriver to open the
battery compartment door on the music/vibration box. Insert the battery as in-
dicated inside the battery door and re-attached the battery compartment door
with screw.
CLEANING:
Seat pad: Remove pad from frame. Fasten buckles on seat restraint machine wash cold
water, gentle cycle. No bleach. Tumble dry low heat. Toy bar and toys: Wipe clean with a damp cloth
and mild soap. Air dry. Frame: Wipe wire frame with soft clean cloth and mild soap.
MODULE BATTERIES:
Remember that batteries are not included. It is up to the Customer to purchase
the appropriate batteries. The manufacturer recommends AA, 1.5 V alkaline batteries. Batteries should
be purchased and disposed of according to the information on the battery package. Do not leave the
module with batteries in the sun or in unsuitable conditions to prevent leakage or bursting of batter-
ies.
WARNING:
Batteries that are low may cause the malfunction of the sensory module. If any of the
functions cease to work, install new batteries immediately.
no slack between the belts and your child when you insert your child and fasten the buckle. Before
fastening the buckle, ensure that your child’s fingers or fabric parts of the child’s clothing do not get
between the buckle parts.
FOLDING THE ROCKER FLAT
Fold down the rocker’s legs, then press the 2 backrest adjustment buttons and change to the lowest
position and move the rotating handle to adjust the lying position (2) and press the second safety lock
(3). After these steps are taken, the product will be folded flat and is ready to be carried, stored flat or
transported.
SENSORY MODULE
The module is equipped with sounds, lights and
vibrations. In order to activate the appropriate
function, press the buttons accordingly:
a) to activate the sound
b) to activate the lights
c) to activate the vibrations
MODULE BATTERIES:
Remember that batteries are not included. It is up to the Customer to purchase
the appropriate batteries. The manufacturer recommends AA, 1.5 V alkaline batteries. Batteries should
be purchased and disposed of according to the information on the battery package. Do not leave the
module with batteries in the sun or in unsuitable conditions to prevent leakage or bursting of batteries.
WARNING:
Batteries that are low may cause the malfunction of the sensory module. If any of the
functions cease to work, install new batteries immediately.
11
EN
1
2
2
a
c
b
