USE:
1. Check the all parts with above list before assembly.
2. Place the left and right support frames opposite each other, with the rear connector tube between
them on a flat surface(1).
3. Lift the flip clip on the both side of the rear connector tube, fit the left support frame & right support
frame into the rear frame tube. Close the flip clip over the tube and push down until the flip clip locks
in place(2,3).
4. Fit both ends of the footrest frame together and screw down(4,5).
5. Fit both ends of the backrest frame together by holding down the spring loaded pin and push the
frames till the pin locates into the holes(6).
6. Open the pocket at the rear of the seat cover back and slide over the seat backrest, stretch the bot-
tom of the seat cover over the footrest frame(7) .
no slack between the belts and your child when you insert your child and fasten the buckle. Before
fastening the buckle, ensure that your child’s fingers or fabric parts of the child’s clothing do not get
between the buckle parts.
FOLDING THE ROCKER FLAT
Fold down the rocker’s legs, then press the 2 backrest adjustment buttons and change to the lowest
position and move the rotating handle to adjust the lying position (2) and press the second safety lock
(3). After these steps are taken, the product will be folded flat and is ready to be carried, stored flat or
transported.
SENSORY MODULE
The module is equipped with sounds, lights and
vibrations. In order to activate the appropriate
function, press the buttons accordingly:
a) to activate the sound
b) to activate the lights
c) to activate the vibrations
MODULE BATTERIES:
Remember that batteries are not included. It is up to the Customer to purchase
the appropriate batteries. The manufacturer recommends AA, 1.5 V alkaline batteries. Batteries should
be purchased and disposed of according to the information on the battery package. Do not leave the
module with batteries in the sun or in unsuitable conditions to prevent leakage or bursting of batteries.
WARNING:
Batteries that are low may cause the malfunction of the sensory module. If any of the
functions cease to work, install new batteries immediately.
11
EN
1
2
2
a
c
b
