ENGLISH
VS-1 CHRONOGRAPH v2.0 INSTRUCTIONS
© COPYRIGHT ST. MORITZ WATCH CORP. 2008
11
ALTIMETER MODE
Press S3 to select Altimeter mode.
* Mode prompt “ALTI” is displayed briefly.
- Altimeter mode indicator is shown.
- The altimeter has 1 meter (or foot) resolution and a working range from -700 meters (-2296 feet) to 9000
meters (29,520 feet).
- Altitude reading in meters or feet is user-selectable.
- A graph showing the changes in altitude is provided.
- Graph data/ altitude history can only be cleared after the watch is reset.
- 24 hour graphic memory recall
- user able to select and preset Altitude values (Local 1, Local2, and Local 3) in setting mode for quick and easy calibration.
- The watch automatically switches between Altimeter and Barometer in Altimeter mode
To set Alti (Altimeter)
-1. In the Alti mode, press and hold S4 for 2 seconds, “CURRENT” flag will begin to flashing,
-2. Use S1 (+) and S2 (-) to display the value you wish to set (flag will flash in order shown below):
CURRENT
LOCAL 1
LOCAL 2
LOCAL 3
MAX
ACC
ALTI
ALARM
-3. When flag for the value you wish to set flashes, press S3 to select and set that value. (Number/ value will flash)
-4. Use S1 (+) and S2 (-) to change the setting. Holding down either button scrolls the setting at high speed.
-5. Once the value is set, press S3 to store the new value.
-6. Press S1 or S2 to display the altitude value (Current, Local 1, Local 2, or Local 3) you may wish to set, then repeat procedure
above.
-7. To reset stored MAX altitude: Press S1 or S2 until MAX flashes. Then Press S3 (stored Max altitude value will flash). Then Press
S1 or S2 to reset Max altitude to zero. Finally, press S3 to exit and store.
-8. To reset ACC (accumulated) altitude: Press S1 or S2 until ACC flashes. Then Press S3 (stored ACC altitude value will flash). Then
Press S1 or S2 to reset ACC altitude to zero. Finally, press S3 to exit and store.
-9. To set an altitude Alarm, press S1 or S2 until ALRM flashes. Press S3 to select Altitude Alarm for setting. Press S1 or S2 to toggle
alarm ON or OFF. Then Press S3 again. (Altitude value will flash). Set value for altitude at which you wish the altitude alarm to
sound by pressing S1 (+) or S2 (-). When altitude value is set, and alarm is on or off, press S3 to save and exit altitude alarm
setting.
10. Press S1 or S2 to recall the desired current altitude to the screen, then Press S4 to exit altitude setting.
IMPORTANT NOTE: The last altitude value shown on the screen, before you press S4 to exit setting mode will be set as the new
CURRENT altitude.
* If there is no button operation for 2-3 minutes at setting screen, the display will return to normal Altimeter mode automatically
Reading the altitude graph
The altitude graph shows recent changes in altitude, with the current altitude represented on the right. Each horizontal point
represents 15 minutes, while each column represents the relative altitude reading at that time.
* The graph is not intended to give an exact altitude: it provides an overview of the trend of change in altitude.
To switch between meters and feet
Press and hold down S1 until the unit indicator (M or Ft) stops flashing to switch altitude between meters and feet.