15
Step 3: Install the new mounting bracket and gasket
-
Use the provided screws in the box to install the
mounting bracket onto your junction box. Make sure
it is tight and secure.
-
With the provided gasket, peel off the white tape and
stick that side around the wall opening.
Make sure
the center hole lines up with the center bracket hole
and that there are no openings around the gasket.
Step 4: Connect the wires
-
You should see three sets of wires: a ground wire
(usually green or copper), black wire, and white wire.
-
The Aria’s mounting base will have its own set of the
same wires. Note that the open side of the mounting
