SHEET No.
4
of
4
Lubrication points (both sides) light oil every 3 months or 5,000
crimps.
7
.
CAUTIONS
1. Repetitive and prolonged use of this tool can result in repetitive
strain to the user. This tool is intended for standard Structured
Cabling installation use and not high volume OEM factory production.
The insulated rubber handles featured on this tool are not protection
against electrical shock.
2. This tool is intended for use on Molex UTP MOD-Clip jacks only as
specified above.
3. This tool is qualified to insert and cut off wires on the jacks as
described above.
4. When the tool is no longer capable of fully inserting and cutting the
cable, the termination head should be replaced. See replacement
part no’s above.
5. This tool is not designed to be disassembled. Customer repair is
not recommended and is not covered by the warranty
Fig-14