Impel™ Backplane and Daughtercard Tooling
Doc. No: TM-622018899
Release Date: 02-21-14
UNCONTROLLED COPY
Page 2 of 25
Revision: A
Revision Date: 02-21-14
Safety Warnings and Information
Read
and
understand
all of the instructions and safety information in this
manual before operating or servicing this tool.
Keep this manual available when using this tool.
Replacement manuals are available for download at no charge at
www.molex.com.
SAFETY ALERT SYMBOL
This symbol is used to call your attention to hazards or unsafe practices which could result in an injury or property
damage. The signal word, defined below, indicates the severity of the hazard. The message after the signal word
provides information for preventing or avoiding the hazard.
DANGER
DANGER:
Indicates an imminently hazardous situation which, if not avoided, could result in death or serious injury.
WARNING
WARNING:
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
CAUTION:
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
CAUTION
may also be used to alert against unsafe practices associated with events that could lead
to personal injury.
WARNING
WARNING
Always
wear proper eye protection when
Operating or servicing these tools.
Failure to wear eye protection could result
in serious eye injury from flying debris.
Never
use a press without guards or
safety devices that are intended to prevent
hands from remaining in the die space.
Failure to observe this warning could result
in severe injury or death.
WARNING
WARNING
Never
wear clothing or jewelery that is loose or
That Could potentially hang into the equipement
And get caught.
Failure to observe this warning could result in
Severe Injury or death.
Never
install or service these tool while
connected to any electrical power source.
Disconnect power by unplugging the press
from its power source.
Failure to observe this warning could result
In severe injury or death.
WARNING
WARNING
Never
operate, service, install, or adjust this
Machine without proper instruction and without
first reading and understanding the instructions
in this manual and all applicable press and/or
wire processing machine
manuals.
Use
extreme caution
when using compressed
air to clean the equipment.
The forces created by compressed air can force
debris into the tool.
Failure to observe these precautions may
result in injury or property damage.
