SpectraMax L Luminescence Microplate Reader User Guide
16
0112-0174 C
CAUTION!
Do not touch or loosen any screws or parts other than those
specifically described in the instructions. Doing so may cause misalignment and
voids the instrument warranty.
To unpack the instrument:
1. Check the box for visible damage that occurred during transportation. In case of
damage, inform the supplier immediately and keep the damaged packaging.
CAUTION!
Keep the box upright. Do not tip or tilt the box or place it on its
side.
2. With the box facing up as indicated on the package, use a box cutter to carefully cut
open the top of the box.
3. Remove the accessory boxes and lift the cardboard and foam packing materials
above the instrument.
4. Lift the instrument, along with the plastic bag, up and out of the shipping box.
5. Remove the plastic bag and place the instrument on a level surface, near the
controlling computer, with the back panel facing you.
Item
Name
1
Electrical power port
2
Computer communication USB port
3
Injector module communication port
4
Injector waste port
Back Panel
6. Insert the USB cable in the USB port on the back of the instrument and insert the
other end in the USB port on the control computer.
7. Insert one end of the instrument power supply into the instrument power cord port
and the other end into the power cord. Then plug the power cord into a grounded
electrical outlet.
