ImageXpress Micro High Content Imaging System Options User Guide
62
5014166 D
4.
Move the flip-in lens into place for the alignment procedure.
The flip-in lens must be out of the way for any actual imaging.
Figure 4-8:
Flip-in lens on the ImageXpress Micro Standard and
XLS Systems
5.
Power on the instrument.
6.
To align the phase ring on page 67
.
7.
After the phase ring has been adjusted, power off the
instrument.
8.
Move the flip-in lens out of the optical path.
9.
Use a 1/16 inch hex key to install the black optics cover over the
lens.
10.
Use a Phillips screwdriver to install both of the left side panels on
the instrument.
ImageXpressOptionsUserGuide.book Page 62 Wednesday, September 9, 2015 3:54 PM
