GenePix SL50 Slide Loader User Guide
5001410 B
27
6.
If you want to save all settings on the Batch Scan tab to re-use
in another scan or if you want to open a previously saved
settings file, use the
Loader
Settings
group and select one of
the following options:
Click
New
to save the batch scan configuration in a loader
settings file (*.gpa).
Click
Open
to open a previously saved loader settings file
(*.gpa).
7.
If you want to scan a slide multiple times (for example, at
different PMT settings or using different scan regions), do the
following:
Select the slide in the Batch Scan list.
Use the arrows in the
Scan # times
field to set the number
of times to scan the slide.
Based on the number of times selected, the scan is copied in the
Batch Scan list (for example 1a, 1b) and each instance of a scan
gets its own entry. You can assign scan settings to each entry
independently.
8.
If you want to select a sub-batch of slides for scanning, use Ctrl-
click and Shift-click to select multiple slides in the Batch Scan
table, and then select the following settings for the sub-batch
scan in the
For the selected sub-batch of slides
group.
Click the
Scans
drop-down list to select the type of scan to
perform on the selected sub-batch of slides.
Type a
File name body
to save the selected sub-batch of
slides with a specific file name.
Choose the
Hardware Settings
for the selected sub-batch
of slides either by clicking
Current settings
or by clicking
GPS file
and using the
[...]
button to navigate to a specific
GenePix Settings (GPS) file.
For each slide in the selected sub-batch, choose the
Auto
PMT
gain either by clicking
Selected hardware settings
to
use the current hardware settings or by clicking
GAL file
and using the
[...]
button to override the specified settings
and navigate to a specific GenePix Array List (GAL) settings
file.
Note:
For information on Auto PMT, see
.
GenePix SL50.book Page 27 Tuesday, February 1, 2011 12:20 PM
