FILTER SET UP - Part 2
MOJO Pure Water, LLC 1-800-990-9775 www.mojowater.com
3. turn on Cold & Hot
Water
Turn on the sink’s cold water and
and hot water - let them run for
30-60 seconds.
2. PREPARE FILTER
Open the included MOJO Water
filter and remove the cap.
Write the date on the front of the
filter so you know when you
installed/replaced the filter.
Your Chill cooler uses model
M1000
filters that are always
available on MOJO Water's
website or on Amazon.
1. GENERAL Overview
The set up will show you how to
insert a T-style valve (called Angle
Stop) onto the cold water pipe
under a sink. Then, a 1/4”
waterway bring the water to the
filter inlet. Water will also continue
to feed the cold water side of the
sink. The purified water will leave
from the outlet of the filter and
then will be run through a small
hole in the countertop - and then
to the back of the Chill.
6. Remove Cold Water
Pipe Above Shut-off
Remove the line that connects the
cold water faucet line to the shut
off valve. Some water may spill
out.
5. Turn Off Cold Shut-
Off Valve
Shut-o
ff
valves come in all kinds
of shapes and sizes - but they all
basically work the same way.
Rotate until the valve stops. The
water should now be o
ff
. Go up to
the sink and turn on only the cold
water. If nothing comes out, your
valve works and you’ve shut o
ff
water to the sink.
WRITE DATE
HERE
4. Feel Temperature Of
Pipes
Under the sink, you should see 2
pipes. The overwhelming majority of
sink’s in the USA have cold water
on the right and hot water on the
left. To be sure, feel the temp of the
pipes to determine which is hot and
which is cold. You will be installing
the waterway onto the cold water
pipe.
CHILL
FILTER
