Mojix
®
STAR 1000 System User Manual
37
Appendix D: Engineering Interface — Mojo
Mojo provides users with an integrated interface for both configuration and execution of the system. The functions of
this interface are summarized as follows:
STAR Parameter Configuration
†
eNode Configuration
†
Inventory Program Generation
†
System Operation
†
To run Mojo, the user must connect to the MCON using VNC and bring up a terminal window by clicking on the
Terminal icon on the desktop. With the terminal window open, enter the following command to launch Mojo:
$ Mojo <STAR ip>
This will launch the Mojo application and the user will be presented with the following screen.
Figure 39: Mojo Main Screen
From here the user must click on the “File” menu and select “Connect”. This will establish a connection between the
Mojo Client application and the STAR. At this point, the user can make real-time configuration changes. The most basic
configuration to begin reading tags would be to enter one or more eNode addresses in the “Exciters” tab as shown in
the following figure.
