Model: 60411
Voltage: 110-125 volts
Amps: 13.0 amps
Wattage: 1500 watts
Lamp Type: Quartz Halogen
Min. Operational Height: 7.3ft. 2'' (87'')
Weight: 45lbs.
Head Unit Dimensions: 18.7'' x 9'' x 9.8''
Complete Assembled
Dimensions: 22'' base, 82'' ht.
*
Always cover the head unit with the outdoor vinyl cover included with your heater
when not in use. Be sure to allow the heater to cool down before covering.
*When not in use for extended periods of time, store under a covered location that is
dry, out of water, safe and out of the way of people & pets that might accidentally knock
over or damage the appliance.
*
When storing, ALWAYS reduce the telescopic pole to it's lowest level.
Note: It is not necessary to remove any of the components or parts when storing this unit.
- Make sure the electrical cord is coiled and out of the way.
This will make it
easier to store and reduce the risk of an accidental knock over.
Your infrared heating system is virtually maintenance free! A few minutes to wipe
down exposed surfaces is all it takes.
* Head Unit & glass plate
- Use any non-abrasive cleaner and soft cloth to wipe off debris
and dirt from the exposed surfaces of the glass plate and outer body of the heat unit
and glass plate. NEVER spray any liquids or cleaners into the housing area where
the halogen lamp is located. Do not try to disassemble or clean the inner cavity where
the halogen lamp is located.
Note: For any maintenance on the head unit, please call the toll free customer
service hotline.
*
Telescopic Pole & Curved Arm Components
- These are all made from stainless steel
materials and can easily be wiped clean using any non-abrasive cleaners and a soft
cloth.
*
Cast Iron Base w/Wheel Assembly
- Use non-abrasive cleaners and a soft cloth. Any
scratches, chips or rust spots can be touched up using an exterior matte finish, black
paint.
Summary of Contents for 60411
Page 1: ...60411 I NT E R T EX L I S T E D CM C US ...
Page 2: ......