Carefully lift the completed head unit assembly from step 2 over the telescopic body
and completely route the electrical cord down thru the top of the body and pull the end
thru the large outlet opening at the base of the body.
See Fig. 5.
Position the completed head unit assembly onto the upright telescopic body assembly.
See Fig.6. The bottom end of upper curved arm from the assembly will fit over the
smaller top tube of the telescopic body. Attach the head unit assembly & arm to the
telescopic pole using 4 threaded bolts, tighten securely. Pull all slack from the electrical
cord at the base of the telescopic body.
Step 6
Electrical cord
routed thru
telescopic body
and out thru
outlet opening
near base
Heating Unit
Head Post
Bracket
Tilt Switch
Upright
telescopic pole
assembly
Telescope
Body
Base
Assembled IR System
in full elevated tele-
scopic position.
FOR REFERENCE
ONLY
Completed head
unit & curved
arm assembly
Lever clamps
and adjustment
knobs
Fig. 5
Fig. 6
Summary of Contents for 60411
Page 1: ...60411 I NT E R T EX L I S T E D CM C US ...
Page 2: ......