B. Firmware upgrades
From
time
to
time,
MOGL
abs
will
release
firmware
updates
that
enable new functionality or address issues.
This section provides
instructions on how to apply firmware updates to your device.
WARNING:
Do not attempt to communicate with the device while a firmware upgrade
is being applied, and do not interrupt an upgrade (or factory reset) in progress.
B.1
Upgrade via
mogrf
The recommended way to install updates is using the “
mogrf
” ap-
plication,
accessed through the File menu.
Information about the
current firmware will be shown and you will be given the option to
install an update (Figure B.1).
Note that
the device should not be
used while upgrading firmware
.
Figure B.1:
The firmware update application connected to a unit, showing
the device information (top) and current firmware versions (middle). Ensure
that the model numbers are correct before continuing.
Update packages are available from the
MOGL
abs website and are
loaded into
the application
by pressing
the “Select” button.
The
firmware in the package is compared against the currently running
version to determine which upgrades are required.
Each component of the firmware is compared against the package
version and colour coded as follows:
31
Summary of Contents for QRF041
