MOGlabs QRF041, Manual

Page: 19 / 64

2.2 Menu system
7
The color of each menu item represents its purpose, as listed below.
White
Static value, displayed for diagnostic purposes.
Yellow
Adjustable value, modified using the encoder wheel.
Orange
Currently selected channel.
Blue
Submenu, entered with the OK button.
Green
Command, executed by the OK button.
When an editable (yellow) value is selected, turning the encoder
wheel changes the value of the selected digit as identified by the
arrow and red text. To change the digit of interest, either use the
<
or
>
buttons or press the encoder wheel to change to
digit selection
mode
. In this mode, the currently selected digit is shown on a black
background, and is changed by turning the encoder wheel. Pressing
the encoder again returns to
value modification mode
.
The options menu (Figure 2.4) allows the device configuration to be
adjusted, such as the power limit of each channel (see also the
LIM
command). The ethernet settings of the device can also be set using
this interface, including the static IP address of the device. When in
use, the network status is displayed on the display footer, and once
connected displays the current IP address.
Note that the “Restart ethernet” command must be used before chan-
ges in the ethernet menu will take effect.
Figure 2.4:
The options menu allows configuration of various settings,
such as the maximum output power (left) and ethernet options (right).