6
Service Procedures
42
Revision 3
©
Moffat Ltd, September 2009
E32SUBC OVEN and PROOFER
5) Undo two nuts from outside cabinet, and two
screws inside cabinet securing float switch
bracket to proofer.
6) Remove float switch assembly from proofer.
NOTE: The float switch bracket has been
silicone sealed, so it may therefore
be necessary to cut around the
bracket with a sharp knife to assist
with removal. Clean off all remain-
ing silicone.
7) Remove the float switch sleeve, and undo the
nut securing the float switch to the bracket.
8) Remove the float switch from the bracket,
replace, and reassemble in reverse order.
NOTE: Ensure float switch bracket is RTV
silicone sealed to prevent steam
leakage.
Figure 6.3.16b
Float switch nut
Float switch
Float switch sleeve
