-24-
Revision 2/F3506
Two Screws
6.3 REPLACEMENT
6.3.1 LIGHT BULB / GLASS
6.3.2 DOOR MICROSWITCH
1) Unscrew lamp cover.
1) Remove service panel (refer 6.2.2).
2) Remove two screws holding microswitch
to bracket.
6.3.3 INDICATOR NEON LIGHT
1)
With control panel open (refer 6.2.1)
remove the wires from the back of the
neon.
6.3.4 POWER / ROAST / LIGHTS / WATER
SWITCHES
1)
With control panel open (refer 6.2.1)
remove the wires from the back of the
switch, noting their positions.
Two Screws
6.3.5 BUZZER
1) Remove control panel (refer 6.2.1).
2)
Remove two screws holding buzzer
bracket to panel.
Figure 6.3.5
2) Unscrew bulb out of fitting.
3) Screw in replacement bulb.
4) Ensure seal fitted. Screw lamp cover into
holder with baffle fitted (do not over
tighten).
Lamp
Cover
Figure 6.3.1
3) Transfer wires to new micro-switch and
re-assemble.
4) Adjust microswitch (refer 6.4.2).
Figure 6.3.2
2)
From back push neon through front of
panel rotating clockwise.
3) Push new neon in from front of panel, and
reconnect wires.
2) From back push switch through front of
panel.
3) Push new switch in from front of panel,
and reconnect wires.
Neon
Wires
Switch
Wires
Figure 6.3.3
Figure 6.3.4