4
Install the shower bar
：
4
安装管组件：
3
安装其它卫浴配件(虚线产品仅供参考)：
Install other bathroom accessories:
(Dashed area for reference only)
1. 在进水软管两端的接头内分别放入垫圈，将进水软管的一端接在
切换阀的接头上，六角螺母的另一端与龙头出水口连接。
2. 安装后请检查各连接处是否连接紧密、管道是否有泄漏，整体安
装是否牢固。确定各部良好后，可放水试用，检查连接处是否漏水。
1. Put the washer into two ends of the flexible hose connector,
connect one side of the flexible hose to the diverter and the other
end which is the hex nut to the water outlet connector.
2.
Check up every step to ensure the stability and tightness to
avoid any leaking before testing the shower spray.
1. 松开下墙座内部的紧定螺钉，调整下墙座的位置，使上、下墙
座之间的距离与两固定座之间距离保持一致，然后拧紧。
2. 将上墙座和下墙座分别对准并套入墙上的固定座，然后用内六
角扳手依次拧紧上、下墙座底部的紧定螺钉，确认安装稳定。
1.Loosen setting screws, adjust the position of below cradle, to
make the distance between upper and lower cradle and the two
fixing ring to be consistent, then screw tight.
2.Insert the upper and lower cradle into fixing ring separately,
and then screw tight the setting screws at the bottom of upper
and lower cradle by hexangular wrench in turn, make sure the
installation is stable.
接头部花洒
Connect shower head
放手持花洒
Connect
shower hose
此框配件供参考
须用户自备
手持花洒
花洒软管
Reference only
Hand shower
Shower hose
此框配件供参考
须用户自备
Reference only
Washer
垫圈
连接龙头出水口
Connection
faucet Outlet
