Moen INS10477 Installation Manual Download Page 9

INS10477 - 8/15

9

Align the discharge elbow with the drain connection and hang the 

disposal by aligning the 3 mounting tabs on the lower mounting 

ring with the slide-up ramps on the mounting ring.

Align the discharge elbow with the drain connection and hang the 

disposal by aligning the 3 mounting tabs on the lower mounting 

ring with the slide-up ramps on the mounting ring.

Align the discharge elbow with the drain connection and hang the 

disposal by aligning the 3 mounting tabs on the lower mounting 

ring with the slide-up ramps on the mounting ring.

Turn the lower mounting ring until all 3 mounting tabs lock over 

the ribs at the top of the ramps. If you are unable to turn the 

mount ring by hand, insert a screw driver through one of the tubes 

on the lower mounting ring to provide extra leverage to turn the 

mount ring.

Turn the lower mounting ring until all 3 mounting tabs lock over 

the ribs at the top of the ramps. If you are unable to turn the 

mount ring by hand, insert a screw driver through one of the tubes 

on the lower mounting ring to provide extra leverage to turn the 

mount ring.

Turn the lower mounting ring until all 3 mounting tabs lock over 

the ribs at the top of the ramps. If you are unable to turn the 

mount ring by hand, insert a screw driver through one of the tubes 

on the lower mounting ring to provide extra leverage to turn the 

mount ring.

I

10

F

11

CONNECTING DISPOSAL TO MOUNT ASSEMBLY

CONNECTING DISPOSAL TO MOUNT ASSEMBLY

CONNECTING DISPOSAL TO MOUNT ASSEMBLY

Before connecting the disposal to the mounting assembly under 

the sink, check that the Lower Mounting Ring 

(I)

 is in place and 

the Cushioning Mount 

(H)

 is engaged securely around the top lip 

of the disposal.

Before connecting the disposal to the mounting assembly under 

the sink, check that the Lower Mounting Ring 

(I)

 is in place and 

the Cushioning Mount 

(H)

 is engaged securely around the top lip 

of the disposal.

Before connecting the disposal to the mounting assembly under 

the sink, check that the Lower Mounting Ring 

(I)

 is in place and 

the Cushioning Mount 

(H)

 is engaged securely around the top lip 

of the disposal.

9

Cushion Mount

Cushion Mount

Cushion Mount

H

Lower Mounting Ring

Lower Mounting Ring

Lower Mounting Ring

I

https://www4.citizens-

bankonline.com/efs/servlet/

efsonline/invalidate-session.

jsp?8207ea5d3e19a5fd

Summary of Contents for INS10477

















Reviews: