INS10477 - 8/15
7
2
B
B
1
3
C
D
E
F
B
x3
4
1) Clean the area around the sink drain where the disposal is to be
mounted. (Evenly apply ½” thick rope of plumber’s sealant around
Sink Flange
(B)
.)
2) Position the Sink Flange
(B)
in the center of the sink drain opening.
Push the sink flange down firmly to make a good seal.
Note:
Excess sealant will be squezzed out during the installation
and should not be cleaned up until the end
DO NOT
move or
rotate the sink flange once seated or the seal may be broken.
Note:
Some sink manufacturers may recommend “Non- Staining”
plumber’s sealant, check your sink care instructions. Using a towel
in the sink to prevent scratching, place a weight on the sink
flange to hold it in place until the sink flange assembly is
secured from the underside of the sink.
1) Clean the area around the sink drain where the disposal is to be
mounted. (Evenly apply ½” thick rope of plumber’s sealant around
Sink Flange
(B)
.)
2) Position the Sink Flange
(B)
in the center of the sink drain opening.
Push the sink flange down firmly to make a good seal.
Note:
Excess sealant will be squezzed out during the installation
and should not be cleaned up until the end
DO NOT
move or
rotate the sink flange once seated or the seal may be broken.
Note:
Some sink manufacturers may recommend “Non- Staining”
plumber’s sealant, check your sink care instructions. Using a towel
in the sink to prevent scratching, place a weight on the sink
flange to hold it in place until the sink flange assembly is
secured from the underside of the sink.
1) Clean the area around the sink drain where the disposal is to be
mounted. (Evenly apply ½” thick rope of plumber’s sealant around
Sink Flange
(B)
.)
2) Position the Sink Flange
(B)
in the center of the sink drain opening.
Push the sink flange down firmly to make a good seal.
Note:
Excess sealant will be squezzed out during the installation
and should not be cleaned up until the end
DO NOT
move or
rotate the sink flange once seated or the seal may be broken.
Note:
Some sink manufacturers may recommend “Non- Staining”
plumber’s sealant, check your sink care instructions. Using a towel
in the sink to prevent scratching, place a weight on the sink
flange to hold it in place until the sink flange assembly is
secured from the underside of the sink.
Re-assemble the Fiber Gasket
(C)
, Backup Flange
(D)
and Mounting
Ring
(F)
and Screws
(E)
. From underneath the sink, place the fiber
gasket, backup flange and then the mounting ring onto the flange in
this order.
Re-assemble the Fiber Gasket
(C)
, Backup Flange
(D)
and Mounting
Ring
(F)
and Screws
(E)
. From underneath the sink, place the fiber
gasket, backup flange and then the mounting ring onto the flange in
this order.
Re-assemble the Fiber Gasket
(C)
, Backup Flange
(D)
and Mounting
Ring
(F)
and Screws
(E)
. From underneath the sink, place the fiber
gasket, backup flange and then the mounting ring onto the flange in
this order.
Holding all 3 parts up against the sink, pull the Snap Ring
(G)
open
and press firmly into the groove on the sink flange until it snaps into
place. Ensure Snap Ring
(G)
is locked into place. Failure to properly
seat Snap Ring
(G)
in groove will prevent proper installation.
Holding all 3 parts up against the sink, pull the Snap Ring
(G)
open
and press firmly into the groove on the sink flange until it snaps into
place. Ensure Snap Ring
(G)
is locked into place. Failure to properly
seat Snap Ring
(G)
in groove will prevent proper installation.
Holding all 3 parts up against the sink, pull the Snap Ring
(G)
open
and press firmly into the groove on the sink flange until it snaps into
place. Ensure Snap Ring
(G)
is locked into place. Failure to properly
seat Snap Ring
(G)
in groove will prevent proper installation.
G
5
