5
10
INS10634C - 11/18
a. 小心对准位置后轻放坐便器，确保排污口对齐，同时将坐便器
边缘下压，确保水平贴紧地面。
b. 安装固定螺栓及帽盖。
a. Align and place the toilet gently to ensure that the drain
outlet is aligned. At the same time, press the edge of the toilet
down to ensure that it is horizontally close to the ground.
b. Install the fixing bolts and caps.
6
7
Connect the supply hose to angle valve
连接供水软管到供水角阀
Angle valve
Ensure the minimum radius of
supply hose is R60mm.
确保供水软管不会弯折影响供
水
，
最小转弯半径不小于
R60mm
。
180mm
Center line of waste hole
Apply silicone caulk around the toilet base
在坐便器底部涂抹适量硅胶
*Do not use the toilet until caulk is
dried.
· The water fittings have been installed. If you have any
questions during the installation process, please contact
MOEN local dealer or MOEN hot line: 400-630-8866.
·
·水件已经安装，如在安装过程有问题可以咨询摩恩
当地经销商或者拨打摩恩热线电话：400-630-8866
·坐便器盖板的安装步骤请参考盖板配套的说明书。
注意：
Note:
For the installtion steps of toilet seat, please refer to
the instructions provided with the seat.
