manualshive.com logo in svg

Moeller XVision XVC-100, Manual

Share
Download
Moeller XVision XVC-100 Manual Download Page 9

Device Description XVC-100 

Text Display PLC 

XVC-100

 

 

 

Introduction 

Subject to technical modifications 
Doc No. 92 23 100000  (06/2002) 
© by Moeller GmbH 

9

2 I

NTRODUCTION

 

 

Advantages of the XVC-100

 

devices 

 

• 

8x20 or 4x10 CHARACTER TEXT DISPLAY WITH VARIABLE FONT 

• 

MEMBRANE KEYBOARD WITH 28 KEYS AND 3 LEDs 

• 

INTEGRATED INPUTS/OUTPUTS 

• 

CANopen STANDARD FIELDBUS INTERFACE 

• 

EXCHANGEABLE COMPACTFLASH™ 

• 

PROGRAMMABLE TO IEC61131 (IL, LD, FBD, SFC, ST, CFC) 

• 

IP65 FRONT 

 
The XVC-100 series text display PLC combines in one device a text display 
operator panel with a powerful compact PLC. This future-oriented device 
concept creates wide range of automation and networking options.   

 

A compact and fully-fledged PLC with digital and analog inputs and outputs 
is provided behind the membrane keyboard with the 8x20 character display. 
Remote peripheral devices can be connected via the integrated CAN bus. 
All plugs are accessible from the rear.  
 
The PLC is programmed in compliance with the IEC61131 industrial 
standard, thus making the XVC-100 text display PLC into a universal device 
for automation tasks. A user-friendly PLC function library is provided for 
designing the visualization functions simply and effectively. 
 
The integration of third-party systems (I/Os, drives etc.) via standard fieldbus 
interfaces (CANopen) and their integration in the overall system offers 
access to a wide range of process optimised peripheral components. 

 

Application range 
 

The XVC-100 series text display PLC is designed for controlling, operating 
and monitoring machines and plants. The rugged and compact design 
allows the implementation of applications that were previously impossible 
due to the prohibitive space and cost requirements involved. 

 

The high degree of protection (front IP65) and the omission of any moving 
parts (hard disks, fans) makes the devices ideal for robust use in rugged 
industrial environments directly at the machine.   

 

The devices can be installed in control panels or control desks without any 
problem. 
 
 
 
This device description is a reference for the technical data, installation, 
terminals, commissioning, operation, and maintenance of all XVC-100 
versions. The illustrations in this document are for the XVC-100 device 
version (

"

 Section 3), unless otherwise stated. The designation and 

function of the connections and signals are the same for all versions. 
 

 

For Immediate Delivery call KMParts.com at (866) 595-9616

Summary of Contents for XVision XVC-100





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands