Moeller PS 416-BGT-4 Series, Hardware And Engineering, Page: 20 / 150

17
02/98 AWB 27-1208-GB
PS 416 system
3 Engineering
Electromagnetic
compatibility (EMC) Observe the engineering instructions in the manual
“EMC Engineering Guidelines for Automation
Systems” (AWB 27-1287-GB)
Reaction times The shortest reaction time can be implemented with
local cards that are addressed by the central unit via
the internal bus. Only the program cycle time and the
input/output delays of the cards determine the
reaction time.
If remote stations are connected via Suconet K, the
reaction time depends on the number of stations on
the line, the data volume and the data transfer rate.
Further information on the calculation of the reaction
time is given in the Appendix.
Interference immunity The PS 416 system is designed for industrial
applications.
Provide the supply cable of the power supply card
with a ferrite ring. Mounting should be carried out as
close to the card as possible. No further connections
to other devices may be implemented beyond this
point.
The following figure shows the use of the ferrite ring,
using the PS 416-POW-400 as an example:
The ferrite ring is not delivered with the cards.
Please order separately:
Type PS 416-ZBX-405
For Immediate Delivery call KMParts.com at (866) 595-9616