Moeller PS 416-BGT-4 Series, Hardware And Engineering, Page: 109 / 150

Test/Commissioning/
Diagnostics
106
02/98 AWB 27-1208-GB
If a program is saved as well, the action can be
finished with RUN if the start attribute is set to
AUTOSTART.
A new operating system can be loaded from the
memory card as follows:
Table 14: Loading the operating system (OS) from the
memory card
1) The load operation takes approx. 12 flash cycles
If the action is completed with NOT-READY, repeat
the process with an error-free memory card.
Loading the user
program The user program can be loaded from the
programming device into the PLC main memory
(RAM) or onto the memory card. The program stored
on the memory card can be loaded in the same way
as the operating system. The load operation is
identical (see above).
Note
All programs and data are deleted from the
CPU memory!
Action Device status
Stop pogram READY
Operating mode selection HALT READY
Press SET button and keep pressed READY
Fit memory card with new OS NOT-READY flashing
Release SET button NOT-READY flashing
1)
Wait for load operation of the OS READY
Note
If there is a self-booting operating system on the
memory card as well as the program, this is also
loaded. All the data in the working memory is
deleted.
For Immediate Delivery call KMParts.com at (866) 595-9616