Software Configuration
34
06/99 AWB 2700-1364 GB
How do I configure the stations?
In the device configuration, an address is defined for
every station in accordance with its position in the
network. The address consists of the line, station and
module numbers and is assigned automatically by
the topology configurator.
Line number
Line numbers are allocated consecutively from left to
right in ascending order.
The LE 4s are connected to the basic unit via line 0.
Line 1 is connected to the Suconet K interface of the
basic unit.
Additional lines can be built from LE 4-501-BS1
network modules which are connected to the basic
unit. The first device immediately after the basic unit
is given the line number 2, the second the number 3.
Station number
Station numbers are allocated consecutively from
top to bottom with the master being given the
number “0“, the first slave the number “1“, etc.
Module number
The module numbers are assigned from left to right
in ascending order with the basic unit being given the
number “0“, the first local expansion module the
number “1“, etc.
In the topology configurator of Sucosoft S 40, the
numbers of the components are displayed above
each device. At the same time, the sequence of
numbers matches the first three digits of the
variable address.
For Immediate Delivery call KMParts.com at (866) 595-9616