7
Operation:
Once the ELYSE DAC is powered up, you must first select your digital input. There are four
buttons with which to select USB, RCA, BNC or AES (AES/EBU) digital inputs. The DAC will
remain in ‘MUTE’ until a digital input is selected that has a valid digital signal present.
There are six LEDs, indicating different data sample rates: 44.1Khz, 48.0Khz, 96.0Khz,
176.4Khz, 192Khz and 384Khz. The DAC is only capable of 24/192 operation, but there will be
future DSD upgrades available and for this reason, the higher sample rate of 384Khz is present.
If you are using a conventional CD or DVD or Universal Player transport, connect to RCA, BNC
or XLR (AES/EBU).
If you are streaming from PC or MAC, then connect USB cable from computer to USB input on
rear panel of DAC. Before using with a computer, you must install USB drivers (CD provided).
PH
button allows for inverting absolute phase. Some recordings are recorded out of phase and
may sound better in phase-inverted mode. This will have to be determined by the listener and
based on each recording.
DISP
buttons allows for front LEDs (except for MWI logo) to be turned off.
Summary of Contents for ELYSE Tube DAC
Page 12: ...12 ...
