17 / 28
7. Slot the two wing connecting rods to one
wing, then connect another wing through the
holes of the fuselage.
8. Secure the wings to the fuselage with the
"click & plug" plastic pieces. Make sure you
hear a "click" sound to secure well.
Schritt 7-8 Ranger 2000
9. Install hinge control horns to reserved
position on main wings with 4 screws. Then
install push rod(40mm) to the servo on each
main wing, through the pre-drilled hole with
correct diameter at the servo arm. Secure the
clevis to the hinge control horn by the second
hole counted from the horn edge, tightened
by the rubber ring.
10. Install the motor to the motor mount with
4 screws. Then connect the motor mount to
the fuselage tower position, secured with 5
screws.
11. Install the propeller to the motor by the order as shown above.