MODSTER HeliX 150, User Manual

Page: 12 / 27

www.modster.at
12
HeliX 150 User Manual
Remove the propeller with a hex wrench,
Be careful tnot to be too tight when installing
the new propeller
When replacing the tail rod, pull the plug
backwards forcefully, pay attention to the
direction when installing, and align the power
cord with the hole.
Unplug the plug, then twist the motor
left and right to pull out
Pay attention to the connecting rod direction
when disassembling and replacing the servo, as
shown:
Pull out the landing gear downwards,
and press the corresponding holes when installing.
Pull out the big gear straight down, pay attention to
the direction when installing the new gear, and the
axis plane should be aligned with the plane of the
inner hole of the gear.
When removing and replacing the tail rotor, please
pay attention to the direction, align the motor shaft
and press it slowly to ensure smooth rotation.
When replacing the receiver, remove the double-sided tape together,
align the new receiver with the edge of the rack and stick it tightly
without skewing, and then connect the servo and the motor in the order
of the plugs.
Parts replacement instructions