background image

2

75-511.13

 Model

 Type 

Model Size

 PAE/BAE

 

30  50  75  100 125 145  –  175  200 225  –  250  300 350 400

 

Suffix

 -1  -2 

*

-14 -4 -5 -6 – -7  -8 -9 – -10 -11 -12 

-13

 

PV/BV

  30  50  75  100  125 145  –  175  200  – 

–  250  300  350 400

 

Suffix

 

-1 -2 -14 -4 -5 -6 – -7  -8 –  – -10 -11 -12 

-13

 

DJE/DHE

 –  –  75  100 125  –  150  –  200 225  –  250  300 350 400

 

Suffix

 –  –  -14 -15 -16 –  -6  –  -8  -17  –  -10  -11 -18 -13

Selection of the Proper Kit

Table 2.2

Natural Gas to Propane Gas Conversion Kit Selection Guide  

(For units manufactured after April 1, 1991)

Base Kit Number – 3H33749…(Choose correct suffix -1, -2, -3 etc., per instructions, before ordering propane conversion kits.)

Table 2.1

Natural Gas to Propane Gas Conversion Kit Selection Guide 

Base Kit Number – 3H034670…(Choose correct suffix -1, -2, -3, etc…)

Table 2.3

Natural Gas to Propane Gas Conversion Kit Selection Guide

Base Kit Number – 3H036483…(Choose correct suffix -1, -2, -3 etc...)

*

  For units manufactured after September, 1993. For units manufactured prior to this date, consult the factory.

  Model Type    

 

 

 

 

 

 

 

Model Size

    

DFG/IFG/NFG, DFP/IFP, DFS/IFS 

75  100  125  150 175 200  225 250  300 350  400

  

Suffix

       

-1 -2 -3 -4 -5 -6  -7 -8 -9 -10 -11

Figure 2.1 

Typical Serial Plate

Modine Manufacturing Company

1221 Magnolia Ave., Buena Vista, VA  24416; Phone: 540-261-2166

PD  250AA0111 

 

115 

5.7 

60

30011013601-0978 

6.0 

ANS Z83.8 - 96

Natural 

3.5 CGA-2.6-M96

 

0.0 

MEA 293-96-E

j

l

k

 Model

 Type 

Model Size

 PD/BD, 

 PDP/BDP

 

30  50  75  100 125 150 175 200 250 300 350 400

 

Suffix

 

-1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12

NATURAL TO PROPANE CONVERSION KIT SELECTION GUIDE

Referring to the model number box on the serial plate in Figure 

2.1 (above), the prefix letters and succeeding numbers which are 

needed for kit selection are PD250.
The letters identify the model, and the numbers indicate the size 

of the unit. Referring to Tables 2.1, 2.2, or 2.3 locate the model 

type column (i.e. PD, BD, etc.). Working with Table 2.1 and the 

row labeled PD/BD, move right searching for the proper model 

size. Read the kit number suffix directly below the model size 

for a PD250. Add this suffix (-9) to the base part number for the 

propane conversion kit shown in the heading of Table 2.1. The 

correct kit for a PD250 with Control Code 11, is 3H034670-9.

Summary of Contents for PD/BD









Reviews: