equipment that may be damaged by this voltage level is
connected to the battery during charging.
•
This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory
or mental capabilities or lack of experience and
knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way
and understand the hazard involved. Children shall not
play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
•
Make sure that the charger switched to maintenance
mode after normal charging is completed, if you want to
leave it unattended and connected for a long time.
If it
does not leave charge mode after maximum time,
disconnect charger from the battery. See technical
specifications below for info about time limit.
•
All batteries will eventually fail. If that happens during
charging, the charger will detect it, but there may be
some rare faults in the battery, so do not leave it
charging unattended for longer periods of time.
•
You need to have read and understood the full context
of this user guide before you start using the battery
charger.
GETTING STARTED
1.
Connecting the charger: Connect the charger to the
supply mains. A flashlight on the top will automatically
turn on to assist you in dark situations. The battery
terminal not connected to the chassis has to be
connected first. The other connection is to be made to
the chassis, remote from the battery and fuel line. The
red clamp should connect to the positive (+) pole of the
battery and the black clamp to the negative (-) pole.
For stand-alone batteries: Connect the charger to the
supply mains. Connect the red clamp to the battery’s
positive (+) pole, and then the black clamp to the
battery’s negative (-) pole.
2.
When all 4 charge level indicators are constantly lit, the
battery is fully charged and has entered maintenance
mode. The battery will be kept fully charged as long as
charger is plugged in to the mains.
INSTRUCTIONS
1.
Connect the charger as explained in GETTING STARTED,
point 1, above. The 4 LEDs in the battery symbol will
flash for a few seconds. Then it will start to analyze the
battery, and the charge level indicators will start rolling
from “battery empty” to “battery full”. After a little
while, the LEDs will have a steady light indicating the
current battery charge level, and when charging is
finished all 4 LEDs will be lit.
2.
If the red light below the level indicators is lit constantly,