6
1.
Installation Method of Intake Hose
•
Align screw thread of connector with
screw thread of tap bore.
•
Switch connector tightly to make
rubber tap press tightly on the tap
bore until it is completely prevented
from water leaking.
•
Switch the joint at the other side of
the intake hose to the joint of
washing machine.
•
Notice: Use your strength evenly
while switching. do not twinkle the
intake hose in case that the hose
end will be broken.
PART 3: PREPARATION BEFORE WASHING
Intake Hose
Nut
Summary of Contents for WT 1121 WAM
Page 1: ...User Manual Book Top Load Washing Machine WT 1121 WAM ...
Page 19: ...11 20 ...
