3
Water Supply Hose Outer Drain Hose Bottom Board
Screw
Bottom Cover Installation
1.
Lean the back of washer forwards a bit, push
the bottom to end from he groove of
pedestal.
2.
Fix the bottom board to the
pedestal of washer by screw.
Outer Drain Hose Installation
I
nsert the outer drain hose into the
intake on the ground and fix it at the
joint near the intake by spring ring.
Placing The Washer
1.
If the washer is not of level, level
up one or two of the washer feet
with small pad to make sure that
the edge of the spin-dry tub is of
the same distance from the
cabinet. Then: adjust the bar until
the washer don’t shake obviously.
2.
Washer is away from the wall at
least 5 cm.
3.
Operating washing machine on the
edge of high places are prohibited,
in case of an accident.
Accessories
PART 1: INSTALLATION
Bottom Board
Spring
Ring
Summary of Contents for WT 1121 WAM
Page 1: ...User Manual Book Top Load Washing Machine WT 1121 WAM ...
Page 19: ...11 20 ...