GENERAL INFORMATION
INSERTING BATTERIES INTO THE REMOTE
CONTROL
1. Open the cover on the back of the remote control.
2. Install the ba eries in the correct polarity.
3. Close the lid.
NOTE
: • Insert two R03 (AAA) ba eries (included) into the
remote control. Please observe the polarity when installing
the ba eries.
• Do not leave the remote control bullets in places with very
high temperature or humidity.
• Do not use a new ba ery with an old one.
• Do not mix manganese ba eries with other types of
ba eries.
• Do not expose the remote control sensor to direct
sunlight or ligh ng devices. This may cause damage to the
device.
• If you do not intend to use the remote control bullet for a
long me, remove the ba eries to prevent possible damage
due to heat or corrosion of the ba eries.
• If the receiver no longer responds to remote control
commands, replace the ba eries with new ones.
NOTE:
1. All pictures in this manual are examples for reference, the
actual product may differ from the product image.
2. When installing the ba ery, do not combine new and
par ally discharged ba eries.
3. If the ba eries are empty and are in the ba ery
compartment, the ba eries may leak electrolyte, causing
damage to the remote control.
4. If the remote control will not be used for a long period of
me, remove the ba eries to avoid leakage of electrolyte.
5.
ATTENTION:
The ba eries must not be exposed to
excessive heat, such as prolonged
USE of the REMOTE CONTROL.
When using the remote control, make sure that the angle of
devia on of the remote control from the imaginary
perpendicular to the infrared ray sensor on the front panel does
not exceed 30 degrees and the distance to the device does not
exceed 5.2 meters.
WARNINGS
:
• * Avoid direct sunlight on the infrared sensor on the front
panel of the device.
• Replace the ba eries in the remote control in a mely
manner.
• Do not drop the remote control and try to protect it from
moisture.
General view of the TV's front panel
NOTE:
All pictures and photos in this user's guide are for reference only. The specific model may differ from the images shown .
5
