English 14
Electricity Connection
MODE NA Exhaust Hood is designed for 220 volt electricity input, single phase with 50 Hz of frequency. This
appliance uses a double-insulated power cord (2 parallel cords) and should not be c onnected to a grounding
wire.
Attention
Overall installation should be performed by a competent person in the field of electrical or able to do the
installation. If you will do the installation yours elf, it is recommended that at first consult to the Service
Cent er Modena.
Details of the method and frequency of cleaning listed in the "Installation and Maintenance"
To separate the equipment from the power source should not attract a wired connection, but the pull of
the base / head power cable.
-
Connect the power cord with an electrical outlet.
-
Slide or press the motor speed regulator button and light switch t o turn vent hood on or off as s hown in
the following picture.
PUSH BUTTON
Turn off the Hood
Use motor at low speed
Use motor at medium speed
Part 3
:
How to Use
Note s:
Adjust the motor speed of the vent hood according to the thickness of smoke / steam generated by the
cooking process.
