English
17
To prevent any electrical shock hazards or injury by rotating circulation fan, always disconnect the
power cord plug from the wall outlet before cleaning.
EXTERIOR AND COOLER COMPARTEMENT
Clean the fr
eezer using soft and dry cloth. If it’s very dirty, use cloth that is lightly soaked
with soap water and rinse using wet cloth. Then rinse with a cloth that has been dipped
in water.
WARNING: Do not splash water directly onto the cooler and do not wash with water. Short
circuit and electrical shock could result.
Clean the cooler regularly to keep it clean at all times.
Do not use polishing powder, soap powder, gasoline, benzene, oil or hot water as this will
damage the paint and plastic components.
Do not pour water onto the unit or
wash with water to avoid shortage
and electricity leakage.
Do not attempt to insert a finger, stick
etc into the cold air outlet since the
circulation fan rotates at high speed
and will result in injury and damage to
the cooling fan.
Do not put heavy or watery objects on
top of the unit to avoid spill which may
damage the electrical components’
insulation.
Refrain from touching the unit during
gas leakage. Open the windows and
doors to vent out the gas. Gas leakage
may cause explosion and fire.
Do not hang onto the door nor climb
the unit. The unit could tip over or fall
and cause material damage or injury
Do not push hand against or apply
excessive force to glass surface as the
glass could be break and cause injury.
Part 4
:
Maintenance
Part 5
:
Precaution & Action
