English
15
BEFORE USE
-
Open the carton box, tape, etc, and leave doors open ventilate for a while.
-
The unit is cleaned before shipment. However, cleaning the inside of the unit after delivery is
highly recommended.
-
Please insert power supply plug into the wall outlet, the unit uses a single-phase.
-
Leave the unit operational for around 1 hour to cool the inner chamber before putting objects
inside it.
WAIT 5 MINUTES OR MORE BEFORE RESTARTING
Restarting the unit immediately after it has been turned off may cause fuses to blow and activate
the circuit breaker, the compressor may be overload, and / or other damage may occur.
TEMPERATURE ADJUSMENT
The thermostat has been adjusted using the temperature in the factory. To adjust, can be done by
turning the temperature control knob, rotate to the right to lower the temperature. To raise the
temperature turn the knob to the left. Adjust the temperature according to usage, excessive cooling
will increase unnecessary power consumption.
DRAIN TRAY
Defrosting is done automatically and disposal of water collected in the drain tray.
The water in the drain tray evaporates automatically. In certain humidity level, a large amount of
water may be accommodated in the tray disposal, so it is not completely evaporate, so it needs to
be checked and drained once each day.
EFICIENT USE
Please follow the instructions below, to save energy. To prevent cold air out, open and close the
door unit as soon as possible. Install the unit in a well ventilated place.
SHELF HEIGHT ADJUSTMENT
Height of shelves can be adjusted. Arrange a rack in accordance with the size of the items to be
stored in the showcase.
PLACING ITEMS IN THE SHOWCASE
This showcase employs a forced circulation of cold air system. If the cold air circulation is blocked,
the goods will not be sufficiently cooled.
Consider the following: Do not let the stuff blocking the inlet and outlet of cold air. Arrange the
placement of goods that do not exceed the size of the rack. The distance between the shelves and
the door is used for circulation of cold air. Place the items evenly on all shelves. Do not store items
on the bottom. Put the stuff on the shelves.
PRECAUTION FOR INSTALLATION
WARNING
Do not damage, modify, excessively bend, strain, twist or bundle up
the power cord. Also, placing heavy objects the power cord or
squeezing it in a tight place could damage it, possible resulting in
electrical shock or fire.
Never use flammable spray cans or leave flammable substances
near the unit. Sparks from electrical switches could result in
explosion and fire.
Part 3
:
How to Use
