Modena GM 2400E, Manual

Page: 21 / 22

English 21
If your unit fails to operate, contact MODENA customer care . If meat is mashing instead of extruding
in strings from the grinding plate, chill the meat to 40°, and check to see that the plate and blade are
properly installed, check that the washer is installed on the back of the auger. A dull knife or plate will
also cause mashing of the meat.
For an overheated plug or grinder housing discontinue use and contact
MODENA customer care .
DO NOT DEFEAT THE SAFETY PURPOSE OF THIS POLARIZED PLUG IN ANY WAY.
CIRCUIT BREAKER INFORMATION:
Your MODENA grinder is equipped with a circuit breaker to protect the unit. In the event of a power
disruption, abnormal operation or over heating, the motor will temporarily shut down to prevent
damage. If this should happen, follow the seven steps listed below:
Step 1: Turn On/Off switch to off.
Step 2: Unplug unit.
Step 3: Check inside of grinding unit and remove any obstruction.
Step 4: Wait 1 or 2 minutes, then plug unit into wall outlet again.
Step 5: Push Restart Button and release. (Located on back panel of grinder #27).
Step 6: Turn switch on.
Step 7: Resume operation.
Aforementioned troubles are just for reference. If any failure occurs, please stop using, and
contact MODENA customer care to check and repair.
Meat Grinder - GM 2400E
Meat Grinder
Electric
Stainless steel
260 W ; 220V/50Hz

Specifications of this appliance may change without notice to improve the quality of the product. Figures in
this manual are schematic and may not match your product exactly.

Values stated on the machine labels or in the documentation accompanying it are obtained in laboratory in
accordance with the relevant standards. Depending on operational and environmental conditions of the
appliance, values may vary.
Part 7: Failure Analysis &Trouble Shooting
Part 8:
Specification