6
Hanger Installation
If the wall is not heat-resistant, it is
recommended to coat it with a
heat-resistant board that is 100
mm bigger than the water heater in
every side and has 10 mm distance
from the wall.
Water Heater Hanger
The water heater should be hanged vertically. The
standard height of the water heater is adjusted
with the parallel position of the flame observation
window (peeping hole) to human eyes.
NOTE
The positions of the water inlet, water outlet, and gas pipe
must be in accordance with the marks on the water heater
body.
Check carefully after the installation has done; make sure
that there is no gas or water leak.
The maximum length of the rubber hose is 2 meters.
Cord, hose, and pipe are prohibited to pass the side or the
upper of the water heater body.
The installation of the hanger must be horizontal.
Drilled Holes on the Wall
Hole Depth >
Fischer (±3 – 5 mm)
Heat-
Resistant
Wall
Hanger
Fishcer
(Plastic Anchor
Bolt)
Screw
Hanger
Fishcer
Screw
Heat-resistant
Board
Hanger
