10
Temperature Control
1.
Adjust the water and gas controller knobs until the desired hot
water temperature is reached.
2.
If the water inlet valve is installed, the valve may not be rotated
excessively to prevent the reduction of the pressure (as a cause of
the difference between pipe and valve diameters) that affects the
normal operation of water heater.
3.
At certain places, the water pressure maybe too strong and thus
the water cannot be heated. In this case, turn the water inlet valve
down (as shown in the illustration picture below).
4.
Flame can be adjusted by turning the flame controller knob to the
‘
max’
or ‘
min’
position (refer to the illustration picture below).
Water Supply
(Inlet)
Rotate the Valve to
Minimum Position
Temperature
Volume
Min
Min
Max
Max
Max
Minimum Position: knob directs to
the “Min” marker
Maximum Position: knob directs to
the “Max” marker
Max
Min
Min
Max
Max
Max
Max
Max
Min
Min
Temperature
Min
Min
Temperature
Volume
Volume
Flame
Flame
Min
