Modena GI 10 S, Manual

Page: 25 / 27

English 22
-
Must be checked by professional :
1. Flexibility of the water and gas connection.
2. Clean the carbon accumulation on the buckled part of the heat exchange.
3. Give lubricants to the gas valve and on the middle part.
4. Caron accumulation and oxidation layer of the disturbing.
Maintenance of the water heater by the user :
1. Release the dirt and dust accumulation on the surface of the water heater with cloth regularly. Do
not use chemical that can change the colour of the surface.
2. Clean the dush and carbon accumulation inside of the ventilation pipe and heat exchange regularly
for making sure the smooth flow of the smoke track
Note : Move the ventilation pipe, clean and clean the heat exchange part with a soft brush. During the
process, do not let the dirt and dust enter through the fire hole from the burner and also from the part
of electric tools,
Do not eliminate or ruin the tools. To install the ventilation pipe again after the cleaning, make sure to
fasten all part of the connector.
Protection function Reaction Explanation
Water pressure too high
if the water pressure exceeds
0,8Mpa, the water outflow valve
will release the water and lower
the water pressure increase the limit of the
valve pressure in
accordance with the local
water supply pressure.
Automatically shut off in 20
minutes
After it has been used for 20
minutes, the water heater will
shut off automatically
Turn on the water heater
again.
Water pressure too low
If the water pressure is below
0.025 Mpa, the water heater
cannot be turned on. Use the water
heater after the
pressure is higher.
Low battery
the battery power will reduce
after some time of usage that the
water heater cannot be turned on
Change the battery
Excessive heat protection
water heater will
turn off automatically when the
temperature is above 77o C Turn on the water heater
again after the water
becomes cold.
Part 5:
Precaution