Modena Forte Series, User Manual Book

Page: 12 / 19

12
Electricity Connection
MODENA Exhaust Hood is designed for 220 volt electricity input, single phase with 50 Hz of frequency. This
appliance uses a double-insulated power cord (2 parallel cords) and should not be connected to a grounding wire.
Attention:
Overall installation should be performed by a competent person in the field of electrical or able to do the installation.
If you will do the installation yourself, it is recommended that at first consult to the Service Center Modena.
Details of the method and frequency of cleaning listed in the "Installation and Maintenance"
To separate the equipment from the power source should not attract a wired connection, but the pull of the base / head
power cable.
SX 6501 S, SX 6501 V, SX 9502 S, and SX 9502 V
•
Connect the power cord with an electrical outlet.
•
Slide or press the motor speed regulator button and light switch to turn vent hood on or off as shown in the
following picture.
Notes:
Adjust the motor speed of the vent hood according to the thickness of smoke / steam generated by the cooking
process.
PUSH Button
A = Indicator lamp
B = Button used for turning lamp on / off
C = Button for turning off the exhaust hood
D = Motor speed button
– LOW
E = Motor speed button
– MEDIUM
F = Motor speed button - HIGH
SLIDE Button
Symbol
To turn on/off the light
0 To turn off the motor
1 LOW motor speed
2 MEDIUM motor speed
Part 4: How to Use