Modena Forte Series, User Manual Book

Page: 10 / 19

10
4.
Install the hood at the wall that already pair 2 screws by hange on the screws.
5.
When the exhaust hood is positioned correctly on the wall, tighten both screws on the upper part.
6. To reinforce the exhaust hood handle on the wall, install the screws on both holes on the bottom part and
tighten them.
7. Connect the exhaust system with the spigot / flange if the exhaust hood is to be operated as a ducting / exhaust
system.
Installation on the bottom part of the kitchen set
1.
Put the exhaust hood on the bottom part of the kitchen set in accordance with the planned position.
2. Mark the bottom part of the kitchen set for flexible pipe hole and then creates a hole if the exhaust hood is to
be operated with ducting / exhaust system.
3.
Install the exhaust hood with 4 screws on the prepared position.
4.
To reinforce the exhaust hood handle on the kitchen set, install the screws on other holes on the upper part
and tighten them.
5. Connect the exhaust system with the spigot / flange if the exhaust hood is to be operated as a ducting / exhaust
system
Note:
There are two methods to air exchange, its are covering ‘horizontal ventilation' and 'vertical ventilation'. Note the
ventilation method when installation.
Horizontal ventilation: As shown in the picture. 4A, use a cover to close the outlet at the top, then the air can be
streamed from behind.
Vertical ventilation: As shown in the picture 4B, use a cover to close the outlet on the back, then air can be
streamed from above.