Modena DD 03, User Manual

Page: 6 / 10

5
1. To avoid unwanted incidents, always disconnect the appliance from electrical sources before
cleaning the dispenser.
2. This dispenser has been disinfected before shipped.
3. Clean the bottle support, water tube, and heating element by an expert technician once a year to
ensure the machine maintains good condition and extend the usage. Do not disassemble the
machine to avoid damage to the machine.
4. Use a soft and slightly wet cloth to clean the surface of dispenser, and use a soft and dry cloth to
wipe the surface.
5. For dispenser with a built-in refrigerator, remove the defrosting water residue from the refrigerator
using a dry cloth or sponge once every seven days or when the defrost water is filling up.
1. Place the dispenser on an even surface. Avoid placing it in a humid
place. Provide a minimum of 20 cm distance from the wall and do
not store flammable substances near the dispenser
.
2. To avoid damaging the machine, do not connect the electrical cord
or pressing hot water switch (red) until the water can flow out from
the hot water tap without obstruction.
3.
If the dispenser won’t be used for a long period, turn off the heater
and cooler switches and disconnect the cord from the electrical
socket and drain the water through the drainage.
4. Do not use chemical substances or spray the water directly to clean
the dispenser. Use soft cloth instead.
5. Do not pull the cord to disconnect the plug from the socket. Pull the
plug with dry hand.
Part 4:
Maintenance
Part 5:
Precaution Action