English
19
Please inspect the following before contacting the Service Center in the event of operational
disturbance:
Problem
Cause
Solution
Water is not hot or not cold.
-
Excessive dispensation of
hot water or cold water in
a short period of time.
-
Unit is not yet connected
to electricity.
-
Wait
until
the
water
becomes cold or hot.
-
Connect the cord to the
outlet and press the heater
and cooler switches.
Water
is
not
being
dispensed out of the tap.
-
Water gallon is empty.
-
The pipe is stuck or
blocks something.
-
Replace the water gallon
with a new one
-
Turn off the switch cooling
to 4 hours, and then turn
the switch back.
Leak on the water gallon
support.
-
Water gallon is leaking /
damaged.
-
Replace water gallon with
a new one.
Loud noise during operation.
-
Improper installation or
placement of unit.
-
Install unit on even and
stable surface.
Part 6
:
Problem & Solution
