English
16
1. Install the dispenser on an even and stable surface.
2. Install water gallon in the correct position
3. Press the water tap button / tap (red) until water runs out of the
tap.
4. Connect the electrical cord to the outlet, and turn on the red
switch (heater) located behind the unit.
5. If the gallon is empty, turn off the red switch (heater) before
replacing it with a new gallon
Attention :
-
Do not connect the dispenser to an outlet nor switch the red switch heater) if there’s no
water in the tank or if water is not running from the hot water tap (red) when the tap is
used.
How to use a dispenser with three taps:
To dispense hot water, push the left button / tap.
To dispense normal-temperature water, push the central button / tap.
To dispense cold water, push the right button / tap.
How to use refrigerator (for Dispenser with built-in refrigerator):
-
Do not store food / drink until after 2 hours of dispenser usage.
-
Hot food must be cooled down to room temperature before stored in the refrigerator.
-
Provide adequate space in the refrigerator to make sure that air is circulating well.
How to use sterilization cabinet (for Dispenser with sterilizer room):
-
Store food or kitchen utensils to be sterilized inside the cabinet and close the door.
-
Turn the timer knob to set the period of sterilization.
-
5 - 10 minutes : to retain freshness.
-
15 minutes : to sterilize.
-
Do not open the cabinet door during the sterilization process to prevent discharge of O3.
-
When sterilization is complete, the timer will automatically return to OFF position.
Remove food or kitchen utensils after one hour of sterilization.
Part 2:
Installation
Part 3:
How to Use
